Instruction Manuals

The Eagle Quantum Premier® (EQP) Addressable Smoke and Heat (ASH) Module is designed to expand the input and output capability of Detector Electronics Corporation’s (Det-Tronics®) EQP system.

Instruction manual for the EQP ASM

Instructions for upgrading old C7050 UV flame detectors to an xWatch Industrial Video Surveillance Camera

Installation and operation instructions for the C7064E.

Installation and operation manual for the 505 CGS Transmitter

Installation, configuration, operation and maintenance instructions for the combustible gas transmitter Model CTX10 with CGS

Safety instructions for the combustible gas transmitter Model CTX10

A dual purpose air shield and flange mount device for Det-Tronics X9800 flame detectors.

Instruction manual for installing the Q5016 with a U5015 smoke detector

Installation and operation manual for the DuctWatch IR gas detector

Eagle Quantum Premier® Fire and Gas Alarm Control System. Covering Automatic Releasing for Pre-Action and Deluge Systems and the related modules such as AIM.

Instructions covering safe application and operation of the EQP Safety System

Installation and configuration details for the EQ3900E

Installation and configuration details for the EQ3900K

Installation and configuration details for the EQ3900N

Installation and configuration details for the EQ3900RPS

Use this software to enhance the capabilities of your Det-Tronics X-Series detectors. Check detector status, download event logs and change operating parameters like optics heating levels and auxiliary relay outputs.

These flange mounts enable you to install the Det-Tronics X3301 and X3302 flame detectors in applications like floating roof tanks where the detector must be outside of the area under protection.

Installation and operation manual for the FlexSight LS2000

Safety manual for the LS2000 Optical IR Gas Detector

Installation and operation manual for the FlexSonic® Acoustic Detector, covering the AC100 sensor and ATX10 Transmitter

HART Communication with the FlexSonic® Acoustic Gas Leak Detector

Instruction Manual for FlexVu Explosion-Proof UD20

Instruction Manual for FlexVu Model UD10

Instructions for installation, configuration, operation and maintenance of the FlexVu Universal Display, Model UD30.

Safety instructions for the FlexVu® Universal Display Model UD30

Installation instructions and technical specifications for the GDTB

The instruction manual for using the Gas Inspector Monitor software with Det-Tronics gas detectors.

Instructions for the EQP General Purpose Electronic Based Fire and Gas Alarm Control Panel and Automatic Releasing for Pre-Action and Deluge Systems EQ3900G Series

Installation and operating instructions for the Det-Tronics pre-configured GP16 gas panel

Instruction Manual for the GT3000 toxic gas detector

Safety instructions for the GT3000 toxic gas detector

Emerson’s user’s manual for their AMS Trex™ Handheld Communicator

Quick Start Guide for the AMS Trex™ HART handheld device

Digital communication with the X3301 allows the operator to monitor the status of the detector, determine factory settings, adjust field settings, and initiate field tests.

Installation and operating instructions for the HSDM

Precisely align the cone of vision for your X-Series flame detector with this laser and laser holder accessory.

Addendum for subject detectors for conformity to NF EN 54-10

Installation and operation instructions for the PM-5MPX detector

Installation and operations instructions for the PIRECL IR Gas Detector

Instructions for duct mounting the PIRECL IR Gas detector

Installation and operation manual for the PointWatch Eclipse IR CO2 Detector

Safety instructions for the PIRECL IR Gas Detector

Installation and operation instructions for the PIR9400

Installation and operational instructions for Power Distribution Module EQ3800

Instruction manual for the Pyrotector Q3013 EP smoke detector duct mount accessory.

Instruction manual for the Pyrotector Model 30-3013 explosion proof smoke detector

Installation and operating instructions for the Model HD risk area heat detector.

Safety System Software (S3) is a complete, high performance Human Machine Interface software package that is designed to work seamlessly with a variety of Safety Systems.

Installation instructions and technical specifications for the STB

Instruction manual for the U5015 SmokeWatch™ explosion-proof smoke detector

Installation and operation instructions for the U9500 Infiniti® Gas Transmitter

FlexVu® Model UD10 Safety Manual

FlexVu® Model UD10-DCU Instruction Manual

This accessories is a dual purpose device, providing a constant supply of clean air across the detector’s optics to keep them clear with a flange mount that enables the user to install an X-Series detector on a duct, tank wall and other applications.

This universal air shield provides a constant flow of clean air to keep your X-Series flame detector’s optics clean.

This combination of mounting arm and collar allow users to easily pan, tilt and rotate any X-Series flame detector for optimal positioning and flame detection.

Instructions for the X9800 with pulse output

Addendum for using HART communications with the X2200

Installation and operation instructions for the X2200 flame detector

Safety instructions for Det-Tronics flame detectors models X2200, X5200 and X9800.

Manual for the X3301 Multispectrum Infrared (IR) Flame Detector

Instruction manual for the installation, configuration, use and maintenance of the X3301 flame detector with pulse output.

This addendum describes the operational benefits offered by the Model X3301 Protect•IR multispectrum flame detector with automotive mode dual stage output for body paint line applications.

Safety instructions for use of the X3301 Multispectrum IR and X3302 Multispectrum IR Hydrogen flame detectors

Installation and operation instructions for the X3302 multispectrum infrared (IR) hydrogen flame detector

Instructions for the X3302 Multispectrum Infrared (IR) Hydrogen Flame Detector with Pulse output.

Addendum for using HART communications with the X5200

Installation and operating instructions for the X5200

Installation and operation instructions for the X5202 detector.

Addendum for using HART communications with the X9800

Installation and operating instructions for the X9800

Instructions for the X9800 with pulse output

Instructions for the xWatch Industrial Video Surveillance Camera

The xWatch Explosion-Proof Camera is available as a factory installed option with any of the Det-Tronics X-Series line of flame detectors.